PAM750-31 by Unknown

Author:Unknown
Format: epub

The text on this page is estimated to be only 21.57% accurate Keep cable clamps fight Avoid hard yanks and jerks while testing cable tightness; this can work them loose. Hold-down brackets tight D Electrolyte must be at least 1/4 H\ [inch over plates. Never overfill up Keep clean, wipe off dirt and corrosion. Wash with fresh water i Electrolyte — Regular should

The text on this page is estimated to be only 22.49% accurate COOLING SYSTEM KEEP IT PROTECTS P DOWN TO YOUR LOWEST COLP WEATHER, TB 7SO-651 TELLS HOW MUCH ANTI- FREEZE AHO CORROSION INHIBITOR TO PUT IN FOR YOUR AREA. § \ Dissolve inhibitor in hot water first. To protect it down to -30°F, you'd use 10 quarts of ethylene glycol-type antifreeze and 6 ounces of inhibitor. In arctic areas you'd use straight arctic grade antifreeze and no inhibitor. And under REMARKS of your DA Form 2408-1 (monthly) mark in the degree of protection and date. TRACTOR HULI o o a a. ft CD O a> O O D . . . After a rain the engine compartment could collect several inches of water. Even after using the bilge pump you'll have about an inch of water left. To drain the hull completely, remove one of the hull access plates. Let it drain and put it back in.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.